Automatic swing door operators

S200

Max. capacity 250 Kg

M200

Max. capacity 250 Kg

PRODUCT DESCRIPTION

 

Automatic door operators TOPP, model S200 and M200, for pedestrian swing doors. They may be used for doors with 700mm widths with maximum weight of 250kg and 1200 widths with maximum weight of 130kg respectively. Power supply 230V~ 50 Hz.

With a minimalist and sober design, with an elegant aluminum cover, are the ide- al solution for prestigious environments, both residential and commercial: shops, offices, hotels and other situations that require an automatic swing door. Simple and easy to install due to the fitting plate, the adjustable settings on the electronic board and the side switches for the power supply, functions and reset selection. In compliance with the EN16005 Standard, the S200 and M200 work in either Full Power and Low Energy modes. The Low Energy mode does not require safety sensors due to the electronic control of force and weight. Due to the combination of 3 different types of arm – slide track arm, push arm and elbow slide track arm

– with extension systems, the mechanisms are very easy to configure and can be adapted to any wall and door type. In case of a power failure, a long-life battery pack will assure the operator’s functioning.

S200 tested in accordance with the EN1634-1 Standard (fire resistance test).

TECHNICAL SPECIFICATIONS S200 M200
Power supply 230V ~ 50/60 Hz 230V ~ 50/60 Hz
Operation modes Full Power or Low Energy Full Power or Low Energy
Working system Opening by motor – Closing by spring Opening by motor – Closing by motor
Power supply for external accessories 24V – 500mA max 24V – 500mA max
Absorption 1:00 am 0,65 A
Absorbed power 230W 150W
Durability 1.000.000 cycles 1.000.000 cycles
Max. opening speed 50°/second 50°/second
Adjustment of automatic closing time from 0 to 60s from 0 to 60s
Max. door-panel weight 250kg for panel 700mm – 130kg for panel 1200mm 250kg for panel 700mm – 130kg for panel 1200mm
Clear passage width
With push arm min 600mm – max 1600mm min 600mm – max 1600mm
With slide track arm min 650mm – max 1600mm min 650mm – max 1600mm
With elbow slide track arm min 700mm – max 1600mm min 700mm – max 1600mm
Max. opening angle of push arm 115° 115°
Max. opening angle of slide track arm 95° 95°
Dimensions 580mm x 130mm x H110mm 643mm x 132mm x H74mm

S200

M200

S200 AND M200 AUTOMATIC SWING DOOR OPERATORS

Max. capacity from 250kg for leaf 700mm to 130kg for leaf 1200mm

3S10001 S200 – automatic swing door operatorwith spring and on-board battery
(250kg for leaf of up to 700mm – 130kg for leaf of up to 1200mm)
3S10001 S200 – automatic swing door operatorwith spring and on-board battery
(250kg for leaf of up to 700mm – 130kg for leaf of up to 1200mm)
3S10001 S200 – automatic swing door operatorwith spring and on-board battery
(250kg for leaf of up to 700mm – 130kg for leaf of up to 1200mm)
3S10001 S200 – automatic swing door operatorwith spring and on-board battery
(250kg for leaf of up to 700mm – 130kg for leaf of up to 1200mm)
3S1011 AA2 Push arm
(for lintel depths from 101 up to max. 200mm)
3S1012 AA3 Push arm
(for lintel depths from 201 up to max. 300mm)
3S1030 EA1 Elbow slide track arm
(for lintel depths from 0 up to max. 100mm)
3S1031 EA2 Elbow slide track arm
(for lintel depths from 101 up to max. 220mm)
3S1100 PS1 Arm extension 25mm
3S1101 PS2 Arm extension 50mm
3S1102 PS3 Arm extension 75mm
3S1180 KIT S200 operator junction cover for double swing door (2 m)
3S1181 KIT M200 operator junction cover for double swing door (2 m)
Note: Electronic board with on-board receiver and possibility to control through TS1S radio remote control selector (as an alternative to MS1S and KS1S selectors).

S200 AND M200 ACCESSORIES

8E1725 WS6 Microwave unidirectional activation sensor
8E1728 IS6 Safety sensor for swing doors (length 690mm – safety range from 340mm up to 900mm) – black. Certified according to EN16005
8E1712 IS6 Safety sensor for swing doors (length 900mm – safety range from 340mm up to 900mm) – black. Certified according to EN16005
8E1771 BF1 2 pieces Flatscan technology safety sensors –white
8E1772 BF1 2 pieces Flatscan technology safety sensors –black
8E1042 MS1S Analog functions selector for swing door automation
8E1043 KS1S Analog  functions selector key operated for swing door automation
8E1083 KC1S key switch for opening/closing
8E1055 TS1S 4-functions wireless selector for swing door automation (open, close, exit only mode, automatic mode)
8E1832 DS2S LCD digital function selector with advanced end-user/installer programming functions for swing door automation – white
8E1833 DS2S LCD digital function selector with advanced end-user/installer programming functions for swing door automation – black
8E1094 HS3 touchless infrared activation switch
8E1091 PU1 Ultra-flat activation push pad
8E1142 TP1 Fingers anti-entrapment system for automatic swing door hinges L=1930mm